STANDARD STAINLESS STEEL WELD MESH

Screen Systems have been producing welded wire mesh for over 60 years

Weld mesh is constructed using wire from less than 1 mm, right through to bar of 20 mm diameter. Some of the more common sizes are listed below and are ex stock in 304 and also 316 stainless steel. However, we can produce weld mesh panels in all 300 series grades of stainless steel. In addition we can we can produce from nickel alloys. We can utilise our in-house jig making facilities to produce your specific requirements, if we haven’t listed the size of mesh you require below, please contact us.

Standard Stainless steel weldmesh

Stainless Steel Weld Mesh Uses

Weld mesh is widely used in domestic and commercial applications. In factories, workshops – for a wide variety uses, as a security mesh i.e. window grilles, data protection, stained glass protection or as machinery guards. Warehouses extensively use welded mesh for storing and racking. Weld mesh is also widely used in gardens and for animal or bird care and containment. It’s often used in construction, civil engineering and transportation, similarly in architectural mesh applications such as walkways, balustrades and cladding.

Specifications

Most weld mesh specifications are available in stainless steel types 304 and 316. The grade depends on how much corrosion resistance is required. For instance in coastal areas where a high salt environment is evident usually 316 is specified. Our stainless steel wire is of the highest quality, ensuring maximum strength and durability. Stainless steel is also used more and more for its qualities of hygiene. We are major suppliers to the chemical, pharmaceutical, health care, food, pollution control, electronics and building industries.

Stainless Steel Weld Mesh Specifications and Weights
Panels 8’ × 4’ 2,440 × 1,220 mm Gauge Wire Diameter Grade
Imp Mesh Size Metric Mesh Size Imperial Metric Material
1” × 1” 25 × 25 mm 12/10 g 2.5/3 mm S/S 304 316
1.5” × 1.5” 40 × 40 mm 12/10 g 2.5/3 mm S/S 304 316
2” × 2” 50 × 50 mm 12/10 g 2.5/3 mm S/S 304 316
3” × 0.5” 75 × 12 mm 12/10 g 2.5/3 mm S/S 304 316
0.5” × 0.5” 12 × 12 mm 12/10 g 2.5/3 mm S/S 304 316
Panels 6’ × 3’ 1,830 × 915 mm Gauge Wire Diameter Grade
Imp Mesh Size Metric Mesh Size Imperial Metric Material
1” × 1” 25 × 25 mm 12/10 g 2.5/3 mm S/S 304 316
2” × 2” 50 × 50 mm 12/10 g 2.5/3 mm S/S 304 316
3” × 0.5” 75 × 12 mm 12/10 g 2.5/3 mm S/S 304 316
0.5” × 0.5” 12 × 12 mm 12/10 g 2.5/3 mm S/S 304 316
Mesh Rolls 30 m × 1 m (98’ × 4’)
Imp Mesh Size Metric Mesh Size Gauge Wire Diameter Material
1” × 1” 25 × 25 mm 16 g 1.6 mm S/S 304 316
0.5” × 0.5” 13 × 13 mm 16 g 1.6 mm S/S 304 316
5/16” × 5/16” 8 × 8 mm 19 g 1 mm S/S 304
Mesh Rolls 30 m × 914 mm (98’ × 4’)
Imp Mesh Size Metric Mesh Size Imperial Metric Material
0.25” × 0.25” 6 × 6 mm 21 g 0.8 mm S/S 304

STANDARD MILD STEEL WELD MESH

Application Specification (in mm)
Safety Barriers 50 x 50 x 3 50 x 50 x 4
Screeding Control 50 x 50 x 1.6 50 x 50 x 2
Shaft Lifting 50 x 50 x 3 75 x 75 x 3
Scaffold Guards 50 x 50 x 3 50 x 50 x 2.5
Brick Pallets 75 x 75 x 2
Parapet Infill 50 x 50 x 3 75 x 25 x 4.75/3
Guniting/Sprayed Concrete 75 x 75 x 3 50 x 50 x 1.6
Window Guards 25 x 25 x 2.5 25 x 50 x 3
Grilles 50 x 50 x 4.75 75 x 150 x 4.75
Cages 50 x 50 x 3 25 x 75 x 3
Gates 50 x 50 x 4.75 50 x 50 x 4
Anti Climb Mesh 75 x 12.5 x 4
Crowd Control Barriers 25 x 75 x 3 75 x 25 x 4.75/3
Security/Riot Control Vehicles 50 x 25 x 4 25 x 25 x 3
Machinery Guards (finger) 75 x 12.5 x 2.5 12.5 x 12.5 x 1.6
Machinery Guards (general) 50 x 50 x 3 50 x 50 x 4
Ventilator Guards 12.5 x 25 x 1.6 25 x 25 x 2.5
Stairways 50 x 50 x 3 50 x 25 x 3
Balustrading/Catwalks 50 x 50 x 4 75 x 25 x 2.5

LIGHT AND GALVANISED LIGHT MESH ROLLS

Reference
Number
Size in mm
Width Mesh Mesh Diam
9/6/22 900 6 6 0.71
9/3/9 900 13 13 1
9/3/5/9 900 13 25 1
9/5/9 900 25 25 1
9/3/6 900 13 13 1.6
12/3/6 1200 13 13 1.6
18/3/6 1800 13 13 1.6
9/3/5/6 900 13 25 1.6
12/3/5/6 1200 13 25 1.6
6/9/6 600 19 19 1.6
9/9/6 900 19 19 1.6
3/5/6 300 25 25 1.6
6/5/6 600 25 25 1.6
9/5/6 900 25 25 1.6
12/5/6 1200 25 25 1.6
9/0/6 900 50 50 1.6
9/5/4 900 25 25 2
12/5/4 1200 25 25 2

Take a look at our other products

STANDARD MILD STEEL WELD MESH